Resin 2:1 = 12000 GRMS

QUANTITY=
12 Kg Pack :-Resin (8 Kg) & Hardener ( 4 KG).

Exclusive Class 2:1 – Yupoxy for coating your creativity.
Semi Thick Consistency for any type of coating and small casting.
Pot Life (20-25 mins at 25 Celsius ) and mixing ratio 2:1 makes it an easy-to-use option for resin art users.
Low shrinkage during cure.
Hard touch time is 8-10hrs and fully cure time is 16-18 Hours.
Corrosion and moisture free.
2nd layer of resin can be done after 8-10 hrs.
Its glossy, non-yellowish impression makes it an excellent choice for top coating.
Can be used on wood, silicon mould, MDF, acrylic, glass & metal bases etc.
It will not drip from any surface while working due to its thick consistency.
Variants :
NOTE-
– Can be used at 50% -60% or below Humidity
Excess humidity in environment may disturb curing process and results in stickiness or Foggy Texture.
– Respirator Mask & Nitrile gloves are advisable to use while working with any resin for safety measures
– CANNOT BE SHIPPED OVERSEAS
Specification-
Mixing Ratio 2:1 Ratio
Viscosity At 25° C 500 – 800
Pot Life 20 – 25 Min
Surface Dry 3 – 4 Hours
Touch Dry 5 – 6 Hours
Fully Cured 12 – 16 Hours
Measurement By Weighing Scale
Important Tips on How to use Yupox Resin-
• Always use “plastic cups only, plastic tumbler or silicone cups for mixing “. Don’t mix Resin and hardener in paper cups as it tends to increase resin temperature.
• Its advisable to use cup size of double capacity than the resin mixing quantity. This gives resin enough space to release. For eg. if you want to mix 100g resin, go for 200-250 ml capacity cup.
• Try to maintain your room temperature at 25 degree Celsius to get the maximum working time.
• Always use digital weighing scale to take the measurements.